Loading ...
Loading ...
Loading ...
Controls and displays
1
1
6
2
34
4
Remote control
As for operating other devices, the remote control codes for
the Pioneer products are preset. The settings cannot be
changed.
1
Í
RECEIVER
Switches the receiver between standby and on.
2
Input function buttons
Use to select the input source to this receiver (page 16). This
will enable you to control other Pioneer components with the
remote control.
AUX
– It is not used with this receiver.
3
Sound control buttons
PHASE
– Press to switch on/off Phase Control
(
page 25).
S.RETRIEVER
– Press to restore CD quality sound to
compressed audio sources (
page 25).
4
Listening mode and component control buttons
AUTO/DIRECT
– Switches between Auto surround
mode (
page 23) and Stream Direct playback (page 24).
STEREO
– Press to select stereo playback (page 23).
ALC/STANDARD SURR
– Press for standard decoding
and to switch between the modes of Pro Logic II and
NEO:6, and the Auto level control stereo mode (page 23).
ADV SURR
– Switches between the various surround
modes (
page 24).
ECO
– Switches between ECO 1/ECO 2. When ECO
Mode is turned ON, the display will go dark (
page 24).
5
Receiver control buttons
AV ADJUST
– Use to access the Audio options
(
page 25).
HOME MENU
– Press to access the Home Menu
(
page 29).
RETURN
– Use to return to the display immediately
previous when making settings
6
/
/
/
,
ENTER
Use the arrow buttons when setting up your surround sound
system (
page 29
).
7
USB
control buttons
Use to control the
USB
source. Operations other than USB
are not possible.
8
TUNER
control buttons
See Listening to the radio on page 20.
9
AUDIO SEL
Press to select the audio input signal of the component to
play back (
page 16).
10
BASS +/–
,
TRE +/–
Use to adjust Bass or Treble.
•
These controls are disabled when the listening mode is set
to DIRECT or PURE DIRECT.
•
When the front speaker is set at SMALL in the Speaker
Setting and the X.Over is set above 150 Hz, the subwoofer
channel level will be adjusted by pressing
BASS +/–
(
page 30).
11
MUTE
Mutes/unmutes the sound.
12
VOLUME +/–
Use to set the listening volume.
13
SLEEP
Press to change the amount of time before the receiver
switches into standby (30 min – 60 min – 90 min – Off). You
can check the remaining sleep time at any time by pressing
SLEEP
once.
14
DIMMER
Dims or brightens the display. The brightness can be
controlled in four steps.
15
STATUS
Switches the display of this unit. The listening mode, sound
volume or input name can be checked by selecting an input
source.
RECEIVERRECEIVER AUDIO SELAUDIO SEL
DISPDISP
TUNERTUNER
EDITEDIT SLEEPSLEEP
TUNE
TUNE
+
TUNETUNE
-
STATUSSTATUS
PRESETPRESET
-
PRESETPRESET
+
PHASEPHASE
S.RETRIEVERS.RETRIEVER
BANDBAND
USBUSB
AVAV
ADJUST
ADJUST
MUTEMUTE
HOMEHOME
MENU
MENU
RETURNRETURN
SATSAT
STREAM BOXSTREAM BOX
BT AUDIOBT AUDIO
DVDDVD
TOPTOP
MENU
MENU
TRETRE
BASS
BASS
VOLUMEVOLUME
1
2
11
12
13
14
15
4
3
5
7
6
8
9
10
CBLCBLBDBD
S.BOXS.BOX
CDCD
GAMEGAME
TVTV
USB
USBTUNTUN
AUX
AUX
BT
BT
HTP-074_En.book 6 ページ ２０１６年４月８日 金曜日 午後６時４５分
Loading ...
Loading ...
Loading ...