Loading ...
Loading ...
Loading ...
9
2. Prepare location for installation
a. Determine the best location to install your unit. Both return and supply ducting
locations are acceptable for installation. Return air installation can assist with
coil cleaning. For more information on best locations for your unit, consult the
installation parameters in this manual or contact Air Sniper.
b. Once an installation location has been determined, take note of the direction
of airflow within the duct for installation, be sure to mount the unit accordingly
(airflow direction is marked at the bottom right of the unit).
c. Ensure that all exterior insulation of the HVAC duct is cut 2” back from the
point of installation. Turn off all HVAC equipment prior to installation.
d. Using one of the included reflective panels as a template, identify and mark
the intended cut out location for mounting the Induct 300W unit and trace the
panel of where the unit will be installed. Traced rectangle should have the
following dimensions: 22 ¾” x 8”
Trace
Loading ...
Loading ...
Loading ...