Loading ...
Loading ...
Loading ...
10 49-1000492 Rev. 3
TOOLS NEEDED
• Phillips Screwdriver
• Measuring Tape
• Carpenter’s Level
• Flathead screwdriver
PARTS SUPPLIED
Anti-tip Brackets (Qty 4)
7RH.LFN%UDFNHWV4W\
Protective Guard (Qty 1)
7RH.LFN4W\
Handle (Qty 1)
´$OOHQ:UHQFK4W\
Screws
BEFORE YOU BEGIN
Read these instructions completely and carefully.
•
IMPORTANT — Observe all governing codes
and ordinances. Save these instructions for local
inspector’s use.
• Note to Installer – Be sure to leave these
instructions with the Consumer.
• Note to Consumer –.HHSWKHVHLQVWUXFWLRQVIRU
future reference.
• Skill level – Installation of this appliance requires
basic mechanical skills.
• Completion time – Wine center Installation
can vary
• Proper installation is the responsibility of the
installer.
• Product failure due to improper installation is not
covered under the Warranty.
LOCATION REQUIREMENTS
IMPORTANT: Before use, this wine center must be
installed properly.
NOTE: Allow the wine center to sit upright on its base
for at least one hour before installation.
• Do not install the wine center where the
WHPSHUDWXUHZLOOJREHORZ)&EHFDXVH
it will not run often enough to maintain proper
temperatures.
• Do not install the wine center where the
WHPSHUDWXUHZLOOJRDERYH)&EHFDXVHLW
will not perform properly.
• Install it on a floor strong enough to support it fully
loaded.
• Do not install the wine center in a location exposed
to water (rain, etc.) or direct sunlight.
Installation
Instructions
Wine Center
Questions? Visit our Website at: cafeappliances.com
In Canada, visit cafeappliances.ca
IMPORTANT: Handle with care when moving wine
center to avoid either damaging the refrigerant tubing or
increasing the risk of a leak.
IMPORTANT: If the wine center has been placed in a
KRUL]RQWDOSRVLWLRQIRUDQ\SHULRGRIWLPHZDLWRQHKRXU
before plugging in to allow the refrigerant to settle.
WARNING
EXCESS WEIGHT HAZARD
Use two or more people to move and install wine
center. Failure to do so can result in back or other
injury.
INSTALLATION INSTRUCTIONS
Screw A
- Qty 4
Screw B
- Qty 6
Screw C
- Qty 4
Screw D
- Qty 4
Screw E
- Qty 2
Loading ...
Loading ...
Loading ...