Loading ...
Loading ...
Loading ...
4.Afteradjustingthedoors,insertthesupplied
fastener(6)usingapliers(5)inthegap
betweenthehinge-grommet(2)andthelower
hinge(8).Thenumberoffastenersyou'llneed
toinsertdependsonthegap.
2fastenerareenclosedwiththe
refrigerator.
Thethicknessofeachfasteneris0.04".
CONNECT THE WATER LINE
TO THE FRIDGE
+ Connect the plastic line on the back of your
fridge to the cartridge holder outlet (fully insert
the plastic line to the cartridge holder outlet).
+ Insert plastic clip to the cartridge holder inlet
and outlet.
+ Turn water on and check for any leakage.
®
+ You can purchase the necessary filter
cartridge at the retailer where you
purchased this refrigerator.
+ The water line must be connected to
drinkable water only
+ A compression fitting and nut kit is
supplied with the unit and it is inside the
fridge drawer.
+ When pushing the Refrigerator back,
make sure you don't roll over the power
cord or water line(Icemaker supply line)
Ca_ridge
(Provided)
TO USE WITHOUT THE WATER
FILTER
Connecting to the water supply line
+ Shut off the main water supply line and turn
the Ice maker to the off position.
+ Locate the nearest cold water drinking line.
1. Cold Water line
2. Pipe Clamp.
3. Plastic line
4. Compression Nut
5. Compression Sleeve
6. Packing Nut.
7. Shut Off Valve
Connect the water line to the fddge
Household water line
Copper tubing or Plastic tubing
(Not su£pl ed! !N0t supplied)
i + Compression
i _nut (1/4")
Ferrule (Purchased)
(Purchased) Bulb
Plastic Tubing
(Provided)
Compression
-- Fitting
(Provided)
__ Compression
Nut (1/4")
(Provided)
Refrigerator
1. Slip the compression nut through the plastic
tubing.
2. After inserting the compression nut into plastic
tubing, tighten the compression nut onto 1/4"
compression fitting(Provided).
Eng+sh - 13
Loading ...
Loading ...
Loading ...