Loading ...
Loading ...
Loading ...
• Water supply is not adequate in area Check another tap in the house,
• Water supply taps are not completely Fully opentap.
open,
• Water inlet hose(s) are kinked, Straighten hose(s),
• The filter of the inlet hose(s) are Check the filter of the inlet hose(s),
clogged.
• Drain hose is kinked or clogged, Clean and straighten the drain hose,
• The drain filter is clogged. Clean the drain filter,
• Load is too small,
• Load is out of balance.
• The appliance has an unbalance
detection and correction system. If
individual heavy articlos are loaded
(ex. bath mat, both robe, arc,), this
system may stop spinning or even
interrupt the spin cycle altogether,
• If the laundry isstill too wet at the end
of the cycle, add smaller articles of
laundry to balance the load and repeat
the spin cycle.
Add 1or 2 similar items to help
balance the load.
Rearrange load to allow proper
spinning
Close the door.
• Is the door ÷ If "alE"is not released, call for service,
opened?
Unplug the power plug and call for
service,
• Water overfills due to the faulty water
valve,
• Water level sensor has malfunctioned.
• Over load in motor.
• Over load in motor.
• Checkwatersupply.
Close the water tap,
Unplug the power plug.
Call for service,
Turn the tap on.
If'dHE" is not released, unplug
power plug and call for service.
Loading ...
Loading ...