Loading ...
Loading ...
Loading ...
16
51
52
53
54
55
56
57
English
Cleaning the hose and nozzle
The vacuum cleaner loses suction if the nozzle, tube,
hose or lters become blocked and when the dust
container is full. In such cases, disconnect the mains and
allow to cool down for 20-30 minutes. Clear blockage
and/or replace lters, empty the dust container and
restart
Tubes and hoses
51 Use a cleaning strip or similar to clear the tubes
and hose.
52 Hose handle can be dismantled from hose if
cleaning is needed.
53 It may also be possible to remove the obstruc-
tion in the hose by squeezing it. However, be
careful in case the obstruction is caused by glass
or needles caught inside the hose.
Note: The warranty does not cover any damage to the
hose caused by cleaning it.
Cleaning the oor nozzle
54 Be sure to frequently clean the combination oor
nozzle. Remove dust-balls, hair or other objects
that may be entangled. Larger objects can be
accessed by removing the connection tube from
the nozzle.
Cleaning the turbo nozzle*
55 Disconnect the nozzle from the vacuum cleaner
tube and remove entangled threads, etc. by
snipping them away with scissors. Use the hose
handle to clean the nozzle.
56 In case if the turbo nozzle stops working, open
the cleaning lid and remove any objects that
obstructs the turbine to rotate freely.
57 Disconnect the nozzle from the vacuum cleaner
tube and remove entangled threads, etc. by
snipping them away with scissors. Use the hose
handle to clean the nozzle.
* Certain models only.
㐕储Ё᭛
⏙┨䒳ㅵ㟛丁
བᵰ丁ǃᬊ㐂ㅵǃ䒳ㅵ◒㎆㹿ฉาˈҹঞ⭊้ῑ
Ꮖⓓᰖˈ఼้ህ᳗༅এDŽ䗭。ᚙ⊕ϟˈ䂟ߛᮋ
䳏⑤ˈϺ䅧″఼ދߚ䧬DŽ⏙䰸ฉา⠽
◒㎆Ϻ⏙ぎ้ῑˈ✊ᕠ䞡ᮄଳࢩ఼้DŽ
Ԍ㐂ㅵ㟛䒳ㅵ
Փ⫼⏙┨ẦП串ⱘ⠽ક՚⏙┨Ԍ㐂ㅵ㟛䒳ㅵDŽ
⏙┨ᰖˈৃҹᇛ䒳ㅵᶘ㟛䒳ㅵᢚ䭟DŽ
㗙ˈгৃҹ⫼ວ䒳ㅵⱘᮍᓣ՚এ䰸ㅵܻⱘฉ
า⠽DŽ⏙┨ᰖ䂟ࢭᖙᇣᖗˈ⚎䰏า䒳ㅵЁⱘ
⠽ક᳝ৃ㛑ᰃ⦏⩗䞱丁DŽ
٭䀏˖⚎⏙┨䒳ㅵ㗠䗴៤ⱘӏԩ᧡າˈϡֱ㆘
ೡܻDŽ
⏙┨ഄᵓ丁
䂟㍧ᐌ⏙┨ഄ⇃⹀䊾ഄᵓ丁ˈএ䰸้⧗ǃ↯
僂݊Ҫৃ㛑䗴៤ฉาⱘ⠽કDŽᕲ丁পϟ䗷
䒳ㅵ֓ৃҹ⏙ᥝ䓗ⱘฉา⠽DŽ
⏙┨⏺䓾丁
ᕲ఼้Ԍ㐂ㅵপϟ丁ˈϺ⫼࠾ߔ࠾এ㋒㌤ⱘ
㎮↉DŽՓ⫼䒳ㅵᶘ⏙⧚丁DŽ
㨀ϔ⏺䓾丁ᬙ䱰ˈ䂟䭟ଳ⏙┨㪟Ϻ⏙䰸ӏԩ䰏
⻭⏺䓾䔝ࢩⱘ⠽储DŽ
ᕲ఼้Ԍ㐂ㅵপϟ丁ˈϺ⫼࠾ߔ࠾এ㋒㌤ⱘ
㎮↉DŽՓ⫼䒳ㅵᶘ⏙⧚丁DŽ
ڙ䰤⡍ᅮൟ㰳DŽ
Loading ...
Loading ...
Loading ...