Loading ...
Loading ...
Loading ...
Tonesareaudiblesignals,indicatingthefollowing:
One tone
• Valid entry(short beep)
• End of Timer countdown (long tone)
Two tones
• Reminder (short beeps), repeat each minute for 15 minutes
after the end-of-cycle tones
• Between stages (short beeps)
Three Tones
• Invalid entry (short beeps)
Four tones
• End-of-cycle (long tones)
To Disable Tones: Turn volume off using the "Hints & Settings"
menu.
The Timer can be set in minutes and seconds, up to 90 minutes,
and counts down the set time. The Timer does not start or stop
the oven.
!. Timer countdown
When the Timer is in use, the oven can still operate. During an
oven operation, "Timer" will appear in the upper, right-hand
corner of the display. The countdown may also be seen by
pressing TIMER SET/OFF. Touch "Return" to go back to the
previous screen or wait until the timer ends. If the timer ends
while oven is still operating, the tone will sound and the display
will return to the set operating mode.
To Set: Press TIMER SET/OFF, enter desired time and touch
"Start." The time can be reset during the countdown by pressing
TIMER SET/OFF, entering a new time, then pressing START.
To Cancel: Press TIMER SET/OFF twice.
The vent fan has 4 speeds ranging from Off to High.
To protect the oven, the fan will automatically turn on at high
speed if the temperature from the range or cooktop below gets
too hot. It may stay on for up to 1 hour to cool the oven. When
this occurs, the Fan button will not function.
• A few seconds after the last time the Fan button is pressed,
the screen returns to the previous display.
The first time the vent fan is turned on after power is
connected to the oven, the fan will start at high speed. The
next time the vent fan is turned on, it will start at the last
speed used.
To Turn Fan On/Off: Press the Fan button to turn fan on, then
touch "+" or "-" on the display screen to select fan speed. Press
the Fan button twice to turn the fan off (or once if the Fan screen
is active).
The cooktop/countertop light has numerous brightness settings
ranging from Off to High. The light can be turned on manually, or
the Night Light can be programmed to come on automatically
when the sensor detects low light level.
To Manually Turn Light On/Off: Press the Light button to turn
light on. Touch "+" or "-" on the display screen to set desired
brightness level. Press the Light button twice to turn light off (or
once if the Light screen is active.
Functions can be selected, and displays can be changed by
using the Hints & Settings menu.
Option Setting
Child Lock Turn on or off.
Display Brightness Set at full, or reduced or off after 2
minutes of inactivity. See "Display
Brightness and Contrast" section.
Keep Warm Adjust time, if desired and start.
Display Contrast Set from MIN to MAX.
Hints Choose from Cleaning, Food, Power
(level), Methods (cooking) or Cookware.
Night Light Turn on or off, and set room light level
detection. See "Night Light" section.
Learning Mode Turn on or off. See "Learning Mode"
section.
Demo Mode Turn on. See "Demo Mode" section.
Volume Set from OFF to MAX.
1. On "Home" screen, touch "More Choices."
2. Touch "Hints & Settings."
3. Touch desired category (touch "More Choices" for more
categories), and choose settings.
Loading ...
Loading ...
Loading ...