Loading ...
CONTENTS
INTRO DU CTION/WARR.MNITy .......................................... 2
SAFETY ............................................................................... 2
PREPARATION .................................................................... 3
INSTALLATION ................................................................ 3_i
ELECTRICAL ..................................................................... 54_
OPERATION ........................................................................ 7
MAINTENANCE ............................................................... 8-9
TROUBLESHOOTING ....................................................... 10
REPAIR PARTS .................................................................. 11
INTRODUCTION
Please take a few minutes to read our instructions before you
install and use your pump. This will help you obtain the full
benefits from this pump. It will also help you avoid any need-
less service costs that result from causes we cannot control
and cannot cover in our warranty.
RULES FOR SAFE INSTALLATION AND OPERATION!
Carefully read and follow all safety instructions in this
manual or on pump.
_k This is the safety alert symboL When you see this
symbol on your pump or in this manual, look for one of the
following signal words and be alert to the potential for per-
sonal injury!
_ DANGER warns about hazards that will cause
serious personal injury, death or major property damage if
ignored.
[&WARNING_wPdRNI_IG warns about hazards that can
cause serious personal injury, death or major property dam-
age if ignored.
[A CAUTION ]CAUTION warns about hazards that will or can
cause minor personal injury or property damage if ignored.
The word NOTICE indicates special instructions which are
important but not related to hazards.
1. To avoid risk of serious bodily injury and property dam-
age, read safety instructions carefully before installing
pump.
2. Follow local and/or national plumbing and electrical
codes when installing pump.
3. Keep the well covered while instalfing pump to prevent
leaves and other debris from Falling into well, contami-
nating well and possibly damaging pump.
4. Protect pump and piping system from freezing. Allowing
pump or water system to freeze could severely damage
pump and voids warranty.
]_kWARNING]Hazardous Voltage. Can shock, burn,
cause death, or start fires.
5. Disconnect electrical power source before installing or
working on pump.
6. Ground pump with a ground wire run from grounding lug
on motor to a grounded lead in the service panel.
7. Line voltage and frequency of electrical power supply
must agree with motor nameplate.
8.Use of fuses or wire smaller than size recommended in
owner's manual can cause overheating, possible fires, and
v_tll void warranty.
9. Pump water only with this pump.
10. Do not run pump dry. To do so will damage seals and can
cause leaking and property damage.
Loading ...
Loading ...
Loading ...