Loading ...
Loading ...
Loading ...
Before You Call
Solutions to Common Problems
Before you call for service, review the following list. It may save you time and expense. Possible solutions are provided with the
problem listed:
Problem
Poor baking results
Oven does not operate.
Solution
Many factors effect baking results. Use proper oven rack position. Center food in the oven
and space pans to allow air to circulate. Preheat oven to the set temperature before placing
food in the oven. Try adjusting the recipe's recommended temperature or baking time. See
"Adjusting oven temperature" on page 18 if you feel the oven is too hot or cold.
The time of day is not set. The oven clock must first be set in order to operate the oven.
Be sure oven controls are set properly. See "Setting Clock" on page 15 and review instruc-
tions for the desired cooking function in this manual.
Service wiring is not complete.
Oven light does not work. Be sure the oven light is secure in the socket. See "Replacing oven light" on page 21.
Flames inside oven or smoking from Excessive spills in oven. Grease or food spilled onto oven bottom or oven cavity. Wipe up
oven vent. excessive spills before starting oven. If flames or excessive smoke are present when using
broil, see "Setting Bake" on page 16.
Oven racks discolored or do not Oven racks left in oven cavity during self clean. Always remove oven racks from oven cavity
slide easily, before starting a self-clean cycle. Clean using a mild abrasive cleaner following manufac-
turer's instructions. Rinse with clean water, dry, and replace in oven.
Incorrect setting. Follow broiling instructions in "Setting Bake" on page 16Oven smokes excessively when
broiling.
Oven control panel beeps and
displays any F or E code error.
Meat too close to the broil element. Reposition broil rack to provide proper clearance
between the meat and broil element. Remove excess fat from meat. Cut remaining fatty
edges to prevent curling.
Grease build up on oven surfaces. Regular cleaning is necessary when broiling frequently.
Grease or food splatters will cause excessive smoking.
Oven control has detected a fault or error condition. Press STOP to clear the error code. Try
bake or broil function. If the F or E code error repeats, turn off power to appliance, wait 5
minutes and then repower appliance. Set clock with correct time of day. Try bake or broil
function again. If fault recurs, press STOP to clear.
24
Loading ...
Loading ...