Serrations can be sharpened using the ceramic hone –
lay the flat side of the serrations onto the side of the
honing slot and use very light pressure to pull the blade
through the slot. Serrations can also be touched up by
nesting the serration onto the ceramic rod, then use
short up and down strokes to restore a sharp edge.
The flat diamond plate can be used to sharpen fishhooks,
hand tools and for knife sharpening applications that
require more material removal.
PIVOT
KNIFE SHARPENER
USER GUIDE
Place knife in carbide sharpening slot at the heel of the
blade. Pull knife through using medium pressure.
SHARPEN
1
1
PRO TIP
PRO TIP
MORE PRO TIPS
Slide the red button left to activate Pivot Response. This
allows the convex carbide mechanism to follow the curve
of the blade and increase material removal for heavy
sharpening. Slide the red button right to lock out Pivot
Response, this will reduce material take off and is better
suited for lighter sharpening applications.
1
Switch to the ceramic hone. Follow the same steps as
above.
Use only the ceramic hone for re-sharpening.
NEW
HONE
2
2
TOOLS/HOOKS
3
FEATURES
3
Convex Carbide
Ceramic Hone
Diamond Plat + Fish Hook Groove
Pivot Response Lock
Lanyard Hole
1
5
2
3
4
LOCK OUT
4 1
2
3
5
