Long knives may require multiple strokes in sections.
Use light pressure when sharpening and honing.
Serrations can be sharpened using the ceramic hone –
lay the flat side of the serrations on the ceramic rod
and use very light pressure to deburr.
Bit Drivers can be used to tighten or loosen common
knife hardware such as pocket clips, frame fasteners,
thumb studs and pivots. Accepts any ¼” driver bits.
MICRO SHARPENER
& KNIFE TOOL
USER GUIDE
Place knife flat on the diamond sharpening guide at the
heel of the blade. Push the knife edge across the abrasive
using light pressure all the way to the tip. Repeat this
step using the opposing guide and pull the knife edge
across the abrasive. Alternate for 5-10 strokes per side.
SHARPEN
1
1
PRO TIP
PRO TIP
MORE PRO TIPS
Sharpen on diamond rod until a burr is formed along the
entire length of the cutting edge.
1
Switch to the ceramic. Follow the same steps as
above.
Use only the ceramic hone for touching up a knife edge.
NEW
HONE
2
2
BIT DRIVER
3
FEATURES
3
Fine Ceramic Rod
Medium Diamond Rod
T6, T8, T10 Bits
Lanyard
Bit Driver
1
5
2
3
4
4
1
23
5
