Loading ...
Loading ...
Groundedelectricaloutletis required.
See "Electrical requirements;' Page 5.
Proper gas supply connection must be available.
See "Gas supply requirements" Page 6.
J
27-1/8" (68.9 cm)
depth with handle
25"
(53.5 cm)
\
,_ .......... 2g-7/8" (75.9 cm)
width
36 _'
(91.4 cm)
cooktep
height
Anti-tip
bracket
Check location where range wiff be installed.The range _ _ /
should be located for convenient use in the kitchen. / _",_'_ I_
Recessed installations must provide complete enclosure of t./ _o,, ,o_ ___ ..... _
thesidesandrearofrange. I ___;'_'_"o_._o. I
ALL OPENINGS iN THE WALL OR FLOOR WHERE RANGE iS I ups, _,,,,_ u_._l I
TO BE iNSTALLED MUST BE SEALED. _ / I
J 30" (75.2 cm) rain ....
,MPORTAN Somecabinetandbui,ding of
• . _ P
materials are net designed to I *
withstand the heat produced by the T _, t io,, m= c ._
ovenforbakingandse.-c ean,ngI // ,I
P g
Check with your builder or cabinet I__/ I
I I
supplier to make sure that the . I /
• , 18" (45 7 cm) ram. I W /
materials used will not dlscomr, clearance' upper _ __'_
delaminate or sustain other I'_
cabinet to "
damage, countertop [
oo,o
supply cord between the
range and the wall.
Do Not seal the range to
8" the side cabinets.
The floor-mounted anti-tip
bracket MUST be installed.
To install the anti-tip bracket
supplied, see Page 8 and the
anti-tip bracket
template/instruction sheet.
material
I
Contact a
qualified floor
covering
installer to
check that the
floor covering
can withstand
at least 200°F 4-1/2"
(93°C). (11.4 cm)
Use an
insulated pad
or 114" (6 ram)
plywood
under range if
installing
range over
carpeting.
17" (43.2 cm) (11.4cm)
If cabinet depth is greater
than 24" (61 cm), oven
frame must extend beyond
cabinet fronts by 1/2"
(13 ram) rain.
2" (5.1 cm)
This shaded area recommended
for installation of rigid gas pipe. *
Flexible gas pipe and electrical
outlet are recommended in either
shaded area.
Note: 24" (61 cm) min. when bottom of
wood or metal cabinet is protected by
not less than 1/4" (6 mm) flame
retardant mill-board covered with not
less than No. 28 MSG sheet steel, 0.015"
(0.4 ram) stainless steel, 0.024" (0.5 mm)
aluminum or 0.020" (0.5 mm) copper.
30" (75.2 cm) rain. clearance between
the top of the cooking platform and the
bottom of an unprotected wood or
metal cabinet.
Page 3
Loading ...
Loading ...
Loading ...