Loading ...
Loading ...
Loading ...
34
Care&Cleaning
CLEANING THE OUTSIDE SURFACES
[] [] [] [] [] [] [] [] [] [] [] [] [] [] [] !! [] [] [] [] [] []
CAUTION
• To prevent damage to stainless steel surfaces, always wipe in the
direction of the grain.
° Use only the cleaners indicated. Chlorine or chlorine compounds in
some cleaners are corrosive to stainless steel.
• DO NOT use abrasives to clean stainless steel surfaces.
• Never allow beverage stains, creamers or sugar to remain on stainless
steel for any length of time.
Wipe stainless steel surfaces with a damp, soft cloth soaked with mild detergent to
remove beverage stains, fingerprints, and other smudges.
DECALCIFICATION INSTRUCTIONS
[] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] []
The monthly decalcification and cleaning process cleans out mineral deposits in
the water and coffee delivery systems. If the mineral deposits are allowed to build
up, the coffee maker will eventually stop working properly. The decalcification
process takes about 4 minutes.
CAUTION
The decalcification powders, tablets and solutions can damage stainless
steel surfaces. To avoid damage, rinse any surfaces that come into contact
with the decalcification powder, tablets and solutions thoroughly with a
mild solution of warm water and detergent.
What to Use
Model Electrolux _
Part Number Description
Reusable flushing cartridge
E24CM76GSS ACCKITA-24 and Puly Decalcification
Powder.
E24CM75GSS and ACCTKIT-24** Puly Cleaning tablets and
E24CM76GSS Decalcification Powder
Filtered Water (4 gpg
E24CM75GSS - maximum water hardness...
DO NOT use distilled water
* Purchase from your Electrolux Dealer
*_ A starter supply is included with your unit. Use this number to reorder
Loading ...
Loading ...
Loading ...