Loading ...
Loading ...
Loading ...
SAW CHAIN TENSION ADJUSTMENT
WARNING: Unplug chain saw from
power source before adjusting saw
chain tension.
A_,WARNING: Cutting edges on chain
are sharp. Use protective gloves when
handling chain.
/1,
_J_ WARNING: Maintain proper
chain tension always. A loose chain
will increase the risk of kickback, A
loose chaln may jump out of guide
bar groove., This may injure operator
and damage chain. A loose chain will
cause chain, gutde bar, and sprocket
to wear rapidly.
IMPORTANT]
Failure to fbllow these instructions when ten-
sioning saw oh;finwill damage saw and void the
warranty For additional information call !-8(10-
626-2237
New saw chains will stretch Check chain tension
frequently whenlirst used ;rodtighten when chain
becomes loose around guide bar
@
If chain becomes loosearound guide
bar, allow chain to cool then ....
Loosen nut...
Turn chain tensioning screw
clockwise to tension saw chain.,.
i,ii,llll i iii,ii
Approx.
Pull chain to check tension. Guide
links should not come out of guide
bar groove.,,
Tighten nut with wrench. A
slight sag of 1/8" between chain
and bottom of guide bar is
acceptable,
ww_ r_mingtonpowottt_olt_ _om 12
Loading ...
Loading ...
Loading ...