Loading ...
Loading ...
Loading ...
8 9
® ®
CUSTOMER CARE - AU: 1800 890 840CUSTOMER CARE - NZ: 0800 002 999
CARE &
MAINTENANCE
CLEANING:
CAUTION: Make sure that the motor
base is unplugged from the power
source before inserting or removing any
attachment and before cleaning.
CAUTION: DO NOT immerse the motor
base into water or any other liquid.
1
Separate/remove all parts from each other.
2
Hand Washing: Wash the containers, lids,
blade assemblies and attachments in warm,
soapy water. When washing the blade
assemblies, use a dish-washing utensil with
a handle to avoid direct hand contact with
blades. Handle blade assemblies with care to
avoid contact with sharp edges. Rinse and air
dry thoroughly.
Dishwasher: The containers, lids, blade
assemblies and attachments are all
dishwasher safe. The lids and blade
assemblies are top rack dishwasher safe.
Ensure that the Blade Assemblies are
removed from the containers before placing
in the dishwasher.
WARNING: Handle the Blade
Assemblies with care when washing,
as the blades are sharp. Contact
with the blades’ edges can result in
laceration.
3
Wipe the motor base clean with a damp
cloth.
NOTE: If the appliance needs servicing,
please call Customer care at: AUST: 1800
890 840 or NZ: 0800 002 999.
STORING:
1 Store the Nutri Ninja with Auto-iQ
™
Pro
Complete
upright with the blade assembly
inside the corresponding container with the
lid secured on top. Do not place anything on
top. Store the rest of the attachments in a
safe place where they will not be damaged
and won’t cause harm.
Secure the power cord
on the back of the base by wrapping the cord
around the cord wrap.
NOTE:
Do not store blended or unblended
ingredients in the Nutri Ninja cup or Nutri
Ninja XL Multi-Serve Jar with the blade
assembly attached.
RESETTING THE MOTOR
THERMOSTAT:
The
Nutri Ninja with Auto-iQ Pro Complete
features
a safety system that prevents damage to the unit’s
motor and drive system should you inadvertently
overload the appliance. If the appliance is
overloaded, the motor will stop. To reset the
appliance, follow the resetting procedure below:
1 Unplug the appliance from the electrical outlet.
2 Remove and empty the cup and ensure that no
food is jamming the cutting blades.
3 Allow the appliance to cool for approximately
30 minutes.
4 Re-install the cup onto the motor base and re-
plug the appliance into the electrical outlet.
5 Proceed with using the appliance as before
while making sure not to exceed the maximum
recommended capacities.
Unit doesn’t turn on:
• Make sure the unit is plugged in and the START/STOP button is pressed.
• Insert and rotate cup clockwise in the base until it clicks into place. When the unit is plugged in and no jar installed, "--" is displayed on the timer.
Unit doesn’t turn off:
• Remove cup from base by rotating cup anticlockwise and lifting out. Display should turn off. Unplug the power cord from the outlet.
Lid/blade assembly hard to assemble:
• Set the cup on a level surface. Place the lid or blade assembly on the top of the cup and align the threads so that the lid/blades sit flat on the cup. Twist clockwise so
that the lid/blades evenly align to the cup until you have a tight seal.
Doesn’t mix well, food gets stuck:
• Using the Auto-iQ programs is the easiest way to achieve great results. The pulses and pauses allow the food to settle towards the blade. If food is routinely getting
stuck adding some liquid will usually help.
• When packing the cups, start with fresh items, then add liquids, powders/dry ingredients, and finally frozen items or ice.
Unit moves on the counter while blending:
• Make sure the surface as well as the feet of the unit are clean and dry.
Unit is difficult to remove from the counter for storage:
• To remove the motor base unit, tip the unit forward from the rear to easily disengage the suction cups.
TROUBLE-
SHOOTING
GUIDE
Loading ...
Loading ...