Loading ...
Loading ...
Loading ...
MINIMUM AND MAXIMUM CONTROL PAD SETTINGS
All of the features listed below have minimum and maximum time or temperature settings that may be entered into the
control. An ENTRY acceptance beep will sound each time a control pad is touched (the acceptance beep on the Oven
Lockout pad is delayed 3 seconds).
An ENTRY ERROR tone (3 short beeps) will sound if the entry of the temperature or time is below the minimum or above
the maximum settings for the feature,
:IFEATURE........................................................................................................................................................................................................................................................................."I"I"U¸¸" TE"P:ITI"Ei"AXI"U¸¸"TE"¸¸P: i
PREHEAT 170°F,177°C 550°F,1288°C
BAKE 170°F/77°C 550°F/288°C
BR_) o o o o
IL ....... 400 I:/205C ..............550 I:/288C .......
CONVECTION BAKE 170°F/77°C 550°F/288°C
CONVECTION ROAST 1700F/77°C 550°F/288°C
CONVECTION BROIL 400°F/205°C 550°F/288°C
PIZZA 170°F/77°C 5500F/288°C
CHICKEN NUGGETS 170°F/77°C 550°F/288°C
12HF. Mode 0:01 Minl 11:59 Hr./Minl
24 Hr. Mode 0:01 Min. 11:59 Hr./Min.
CLOCK T!ME 12HF. MOde 1:00 Hr./Min: 12:59Hr./Min,
24 Hr. Mode 0:00 Hr./Min. 23:59 Hr./Min.
DELAY START 12HF. Mode 1:00 Hr.lMin. 12:59 Hr./Min:
24 Hr. Mode 0:00 Hr./Min. 23:59 Hr./Min.
BAKE TIME 12 HF.Mode 0:01 Min: 5:59 Hr./Min:
24 Hr. Mode 0:01 Min. 5:59 Hr./Min.
SETTING THE CLOCK
The SET CLOCK pad isusedtosettheclock.The clockmay
be set for12 or 24 hour time of day operation.The clock
has been presetat thefactoryforthe 12 hour operation.
When the range isfirstplugged in,or when the power
supplyto the range has been interrupted,thetimerinthe
display will flash.
To set the clock (example below for 1:30)
1. Press SET CLOCK. "CLO" will appear in the display.
2. Press 1 3 0 pads to set the time of day to 1:30. "CLO"
will stay in the display.
3. Press START. "CLO" will disappear and the clock will
start.
CHANGING BETWEEN 12 OR 24 HOURTIME
OF DAY DISPLAY
1. Press and hold SET CLOCK for 6 seconds. "CLO" will
appear in the display.
2. CONTINUEholdingthe pad until"Z2HrdAY"or"24Hr
dAY" appears in the display and the control beeps
once.
3. Press SELF CLEAN to switch between the 12 and 24
hour time of day display. The display will show either
"12Hr dAY" or"24Hr dAY".
4. PressSTART toacceptthechangeor pressCANCEL to
rejectthechange.
5. Resetthecorrecttimeas describedinTo set the Clock
above.Pleasenotethatifthe24 hourtimeofday mode
was chosen,the dock willnow displaytimefrom 0:00
through23:59 hours.
Loading ...
Loading ...
Loading ...