Loading ...
Loading ...
Loading ...
EN
26
Operation
www.bora.com
INFO If the cooktop is switched off at the end of the
cooking session (turn the selector ring to the
12 o’clock position), the childproofing feature is
automatically re-activated
.
6.2.8 Using the timer function
INFO You can set a time range of between 1 and
120
minutes for the timer functions.
Set time
Twist the knob ring to the 11 o’clock position.
t
appears on the control knob display.
Press the touch surface for one second.
A beep can be heard and the control knob display
switches to
0
0
0
.
Within 3 seconds, twist the knob ring to set the timer
time.
Turning clockwise increases the time (starting at
0 minutes), while turning anticlockwise reduces the
time (starting at 120 minutes).
In the range from 0 to 20 minutes, the time reduces/
increases in both directions by one minute at a time,
while the increments are 5 minutes for the rest of the
range.
If no time is set within 3 seconds, the timer is
deactivated and the control knob display switches to
t
.
Press the touch-surface within 3 seconds to confirm
the time set.
A beep sounds and the set value starts to flash on the
control knob display.
Activating the timer function
Once you have confirmed the time set, you have 3
seconds to turn the knob ring to the power level you
want.
This activates the timer function and the time starts to
count down.
The displays swaps (for 3 seconds each) between the
power level and the remaining time (accurate to the
minute for more than 2 minutes and accurate to the
second for under 2 minutes).
Once the remaining time is less than 2 minutes, only
the time is displayed.
At the end of the time, the cooking zone is switched
off, a beep sounds for 2 minutes and the control knob
display flashes
0
0
0
.
The flashing and the beeping can be stopped by
pressing the touch area or twisting the knob ring to the
12 o’clock position.
Switching the timer off early:
Twist the knob ring to the 12 o’clock position.
The control knob display changes to 0, a beep sounds
and the cooking zone switches off.
Increase heat retention level
Press the touch surface on the control knob a second
time for 1 second to activate heat retention level 2 (
:
).
Press the touch surface on the control knob a third
time for 1 second to activate heat retention level 3 (
*
).
This is always confirmed with an acoustic signal and
the corresponding symbol is displayed.
Reduce heat retention level
After setting heat retention level 3, pressing the touch
surface (1 second) again reduces the level by 1.
This is always confirmed with an acoustic signal and
the corresponding symbol is displayed.
Switching off heat retention level
The heat retention level activated switches off if you
select another power level
switch off the cooking zone
6.2.7 Childproofing feature
INFO The childproofing feature can only be activated or
permanently deactivated if both knob rings are at
the 12 o’clock position and no function is active.
Activating the childproofing feature
Press the touch surface of one of the control knob for
5 seconds.
An acoustic signal is heard and
L
is displayed.
The display goes blank after 10 seconds and the
childproofing feature is activated.
Permanently deactivating the childproofing
feature
Press the touch surface of one of the control knob for
5 seconds.
An acoustic signal is heard and the display changes
to
0
. The display goes blank after 10 seconds and
the childproofing feature is permanently deactivated.
Deactivating the childproofing feature for a
cooking session
Turn the knob ring from the 12 o-clock position to a
power level.
L
is displayed.
Press the touch surface of the control knob for
5 seconds.
An acoustic signal is heard and the selected power
level is displayed.
The childproofing feature is only deactivated for this
cooking session and you can set the power level you
want.
The childproofing feature is reactivated next time you
switch on.
Loading ...
Loading ...
Loading ...