Loading ...
Loading ...
Loading ...
Foam seal A
(adhesive type)
Fig.13
Fig.14
Window
Panel
Fig.15
Foam
Seal
Fig.16
72 cm -2.07 m
(28.3 - 81.5 in.)
Installation Instructions
INSTALLATION IN A SLIDING SASH WINDOW
1. Measure the adhesive foam seal to fi t the windowsill. Cut the foam seal (adhesive type) to the prop-
er length and attach it to the window frame. Fig. 13
2. Adjust the length of the window slider kit according to the height of the window, shorten the adjust-
able window kit if the height of the window slider is less than the opening. Open the window sash
and place the window slider kit on the windowsill. Fig. 14
3. Cut the foam seal (adhesive type) to the proper length and attach it to the top of the window. Fig. 15
4. Close the sliding sash securely against the window.
5. Cut the foam seal to an appropriate length and seal the open gap between the top window sash
and outer window sash. Fig. 16
52 cm - 2 m
9
Loading ...
Loading ...
Loading ...