Loading ...
Loading ...
Loading ...
Installation Instructions
LOCATION
• The air conditioner should be placed on a fi rm foundation to minimize noise and vibration. For safe
and secure positioning, place the unit on a smooth, level fl oor strong enough to support the unit.
• The unit has casters to aid placement, but it should only be rolled on smooth, fl at surfaces. Use
caution when rolling on carpeted surfaces. Use caution and protect fl oors when rolling over wood
fl oors. Do not attempt to roll the unit over objects.
• The unit must be placed within reach of a properly rated grounded socket.
• Never place any obstacles around the air inlet or outlet of the unit.
• Allow at least 30 cm of space away from the wall for effi cient air conditioning.
WINDOW SLIDER KIT INSTALLATION
Your window slider kit has been designed to fi t most standard vertical and horizontal window applica-
tions, however, it may be necessary for you to modify some aspects of the installation procedures for
certain types of windows. The window slider kit can be fastened with a screw (see Fig. 8)
NOTE: If the window opening is less than the minimum length of the window slider kit, cut the end
without the hole in it short enough to fi t in the window opening. Never cut out the hole in window slider
kit (visit www.danby.com for general instruction videos).
7
Loading ...
Loading ...
Loading ...