Loading ...
Loading ...
Loading ...
www.PyleUSA.com10 www.PyleUSA.com 11
Problem Probable Cause Solution
No display
The power socket is in poor
contact or without electricity
Check the power supply and plug
of the socket.
There’s display but
no sound output
1. The speaker wiring is wrong.
2. The playback source doesn’t
corresponds to the selected
signal state
3. The volume level is in lowest
output state.
4. MUTE is activated
1. Connect the speaker line
according to the wiring diagram
2. Select the input state which is
playing
3. Turn the main volume & adjust
the knob clockwise.
4. Disactivate MUTE
Remote control
doesn’t work
1. The remote transmitter window
is not aimed at the local
receiving window.
2. There are obstacles between
the unit and the remote control
3. Drained remote control batteries
1. Aim at the host receiving
window.
2. Remove obstacles
3. Replace new battery
Out of control
Being disturbed or improperly
operated
Turn it OFF and than turn it ON
Sound distortion Main volume adjustment is too much Turn down the main volume
The channel sound
is wrong
Channel sound mode is not correct
Press 'CH. MODE' on the panel or
remote control
Music les in USB
can’t be played for
long period of time
The USB les is not supported Delete unsupported les
The phone cannot
transmit audio to
the amplier via
BT.
1. The BT function of mobile
phone is not opened.
2. No music is played on the
phone.
3. Amplier BT is not paired with
mobile phone BT.
4. Incorrect amplier input channel
5. BT can't connect.
1. Turn ON BT.
2. Open the phone and play
music
3. Rematch BT connection
4. Switch the amplier input into
'BT' channel.
5. Turn o other BT devices
Wireless BT Function
1. The receiver connects to your Wireless BT-enabled device, allowing the system to
receive your wireless bt signal and stream audio to any connected speaker system.
2. Press the ’ANALOG INPUT’ on the remote control or control panel of the receiver
system, then enter to ’BT’ mode--as indicated on the display screen.
3. Ensure Wireless BT is activated on your device and search for BT Network named:
PYLEUSA
4. No password is required for connecting.
ARC (Audio Return Channel) Function
The ARC (Audio Return Channel) function makes it easy for the PT696BT to play
audio from any TV with a single HDMI cable. It can be adjusted either on the front
control panel or via the included remote control.
Enable your TV to send audio signal upstream to a connected speaker system or AV
receiver while eliminating additional cable connections and clutter from an optical
audio cable (S/PDIF). ARC audio transmission links your speaker output to your
television controls, meaning you do not need an external/additional remote or
interface to congure audio levels. Enjoy an optimal multimedia home theater
experience by connecting your television and Hi-Fi equipment into one, seamless
entertainment system.
FM RADIO
Press "AUTO", "TUNE+/-", "CH+/-" button on the remote control. Operate automatic
search and save station, manually save and select the stored station function.
DSP Sound Field Control
Press "DSP"or "CH MODE" on the remote control. 7 dierent sound eld eects can
be selected. (LIVE/HALL/DISCO/CHURCH/ROCK/JAZZ/CLASS)
NOTE: Pressing those button on the digital input channel is invalid
LOUD
Press "LOUD ON" on the remote control. The low frequency of this unit can be
increased appropriately at low volume. Then press "LOUND OFF" to cancel this
function.
DISPLAY
Press ’DISPLAY’ button on the remote conlrol to adjust dierent display mode.
RESET
Press ’RESET’ button on the remote control to restore to the factory setting state.
MUTE
Press ’MUTE’ button on the remote control to turn ON or OFF MUTE function.
STANDBY
Press ’STANDBY' button the remote control to turn ON standby state. Press again to
cancel standby mode.
Troubleshooting
If you are still experiencing issues, please contact your authorised local dealer or contact us
on www.PyleUSA.com.
Loading ...