Loading ...
Loading ...
Loading ...
WARNING – SERVICING TO BE CARRIED OUT ONLY BY AN AUTHORISED PERSON
Disconnect from electricity and gas supplies before servicing. Check appliance is safe when you have nished.
44
6.10 To Replace the Tall Oven Door Magnetic Latch
Remove the control panel (see 4).
Remove the plinth (3 screws) and the central vertical cover (5
screws). Prize the retaining clip o the magnet unit. Fit new
unit and retaining clip.
Reassemble in reverse order.
Check correct door operation.
6.11 To Change an Oven Door Seal
Open the oven door. The seal is held in place by small hooks
on the rear face. At the corner, pull the seal diagonally away
from the door centre until that hook is released (Fig. 12.17).
Proceed to the next hook and release it in a similar way, and
so on. Use force if the hooks are sti, as the old seal will be
discarded.
When tting the new seal, position the seal join at the
bottom. Hook the new seal in one of the corner holes of the
door, and proceed round the door, snapping in each hook in
turn.
6.12 Oven Door Glass
The glass on the oven doors is not replaceable.
ArtNo.320-0005 Oven door rubber seal
Fig. 12.17
Loading ...
Loading ...
Loading ...