Loading ...
Loading ...
Loading ...
Problem solving guide
61
Problem Cause and remedy
After a while, the temperature will return to normal by
itself.
The ambient temperature is too high. The higher the
ambient temperature, the longer the compressor
runs.
See the information in “Installation – Installation
site”.
The refrigeration appliance was not properly installed
in the niche.
Install the refrigeration appliance in the niche as
described in the installation instructions supplied
with it.
The temperature setting in the refrigeration appliance
is too low.
Correct the temperature setting.
The SuperCool function is still switched on.
Switch off the SuperCool function earlier to
save energy.
The compressor comes
on less and less often
and for shorter periods
of time.
This is not a fault. The temperature is too high.
Adjust the temperature.
Check the temperature again after 24 hours.
Ice or condensation has
built up inside the refri-
geration appliance. The
appliance door may not
close correctly.
The door seal has come out of its groove.
Check that the door seal is correctly positioned in
the groove.
The door seal is damaged.
Check whether the door seal is damaged.
The door seal is dam-
aged or needs to be re-
placed.
No tools are required to change the door seal.
Change the door seal. A replacement is available
from Miele or from specialist retailers.
Loading ...
Loading ...
Loading ...