Loading ...
Loading ...
Loading ...
Cleaning and care
55
Preparing the refrigeration ap-
pliance for cleaning
Tip: Switch Cleaning mode on. The
cooling system in the fridge zone is
switched off, but the interior lighting re-
mains switched on.
In Settings mode, use the or
sensor control to scroll to the
symbol.
Touch OK.
When Cleaning mode is switched
on, a dot appears in the upper corner of
the display
.
The start display shows when Cleaning
mode is switched on.
The cooling system in the fridge zone is
switched off, but the interior lighting re-
mains switched on.
Take any food out of the refrigeration
appliance and store it in a cool place.
Remove any accessories that can be
removed for cleaning (see “Remov-
ing, dismantling and cleaning the ac-
cessories”).
Cleaning the inside of the ap-
pliance
The refrigeration appliance should be
cleaned regularly (at least once a
month).
If soiling is left on for any length of
time, it may become impossible to
remove under certain circumstances.
Surfaces may suffer discolouration or
damage.
It is therefore best to remove any
soiling immediately.
Clean the interior with a clean
sponge, lukewarm water and a little
washing-up liquid.
After cleaning, wipe with clean water
and dry with a soft cloth.
Clean the condensate channel and
drain hole frequently using a cotton
swab or similar item to ensure that
condensate can drain away freely.
Leave the door open to air the refri-
geration appliance sufficiently for a
short while and to prevent odour
build-up.
Loading ...
Loading ...
Loading ...