Loading ...
Loading ...
Loading ...
Always disconnect the power supply before carrying out any kind of maintenance work.
Cleaning
The hood should be cleaned regularly both inside and out (at least as often as you carry out
maintenance on the grease filters).
Use a damp cloth with mild cleaning products. Avoid using harsh products. DO NOT USE ALCOHOL!
Warning: Failure to follow the cleaning instructions on the hood and the replacement and
cleaning of the filters, could lead to a fire starting. Please, therefore, follow the instructions given
carefully.
Maintenance
12
Grease filter
It should be cleaned by hand once a month with
mild cleaning products, or in the dishwasher at a
low temperature and on the short cycle.
When washing in the dishwasher, the metallic
grease filter might discolour but its filtering
abilities remain unchanged.
In order to dismantle the grease filter, pull the
spring handle to unhook it. Fig. 7
Carbon filter (only in recirculation mode) Fig. 8
The Activated Carbon Filter absorbs the
unpleasant smells produced when cooking.
The saturation of the carbon filter varies
depending on the installation, usage and how
often the grease filters are cleaned.
In any case, the cartridge must be replaced at
least once every four months.
Fitting/dismantling the carbon filter:
- Remove the grease filter, unhook the filter
support frame taking care to disconnect the
control panel and lights (see Fig. 5).
- Attach a carbon filter on each side to cover
both the protection grills on the motor
impeller, then turn the central handle C on the
filters clockwise. Turn the central handle C on
each filter anticlockwise to dismantle.
- Refit the filter support frame, re-connecting
the control panel and lights and refitting the
grease filter.
Replacing the bulbs Fig. 9
Disconnect the appliance from the mains supply.
Warning! Before touching the light bulbs make
sure they have cooled down.
1. Remove the protective cover using a small flat
screwdriver or a similar tool.
2. Replace the blown bulb.
Only use 20W max (G4) halogen bulbs, and do
not touch them with your bare hands.
3. Fit the light cover on again (clicks into place).
If the light does not work, check that the bulb has
been inserted properly before calling the
Customer Care Centre.
Loading ...
Loading ...
Loading ...