Loading ...
Loading ...
2
2 PARTS SUPPLIED
Small pan support (1)
(some models only)
Dual Wok Pan support
(Models with a Dual Wok only)
Pan support
(not supplied with
Dual Wok only models)
Wok stand (1)
Fibre washer (1)
Elbow 1/2“ BSP
external thread (1)
Clamping
brackets (4)
and screws
NG regulator (1)
(NG models only)
LPG test point
adaptor (1)
(LPG models only)
Installing multiple products
Note: We recommend installing multiple products in separate cutouts, with a minimum 5mm space between the glass edges of the adjacent products.
If installing multiple products adjacent to each other within the same cutout, a separate joining strip kit is required for installation.
The kit is available from the nearest Fisher & Paykel Authorised Service Centre or our website listed at the end of this document.
If installing different products adjacent to each other (eg a wok burner next to an induction cooktop), the minimum clearance measurements for the different
products may vary. Always use the greater distance
Mini wok Pan
support (1)
(CG604D only)
Loading ...
Loading ...
Loading ...