Turbo Air JBT72N User Manual

Loading ...

DISPLAY PANEL OF REFRIGERATOR AND FREEZER

BASIC OPERATION

1. Plug in and turn on the power switch located on the top side of the unit front cover.

The display panel will be lighted and make a beep sound. The compressor will

begin to run.

2. The default temperature setting is No. “4”.

3. The compressor is automatically cycled by the electronic controller (PCB).

4. The defrost cycle is automatically controlled by the PCB.

5. Set level toward “1” for higher temperature and “8” for lower temperatures.

6. Good air flow in refrigerator unit is critical.

Be careful to load product so that it neither presses against the back wall, nor

reaches within four inches from the evaporator compartment.

REFRIGERATOR

TEMPERATURE

Current Setting

MEAT

- By pushing the up/down button, you can set the inside temperature.

- If you want lower temperature push the down button to be lighted lower level numbers.

TEMP.

SETTING

TEMP. CONTROL

BUTTON

MEAT BUTTON

EVA FAN

INDICATOR

FREEZER