Loading ...
Loading ...
Loading ...
Installation
45
EN
2. Remove the flame-spreader crowns and
relative burner caps.
3. Pull the knobs upwards to remove them.
Replacing nozzles
1. Replace the nozzles using a 7 mm
spanner according to the gas to be used
(see Burner and nozzle characteristics
tables).
2. Replace the burners in their respective
housings.
Only for burner UR2:
1. Remove the burner caps and the flame-
spreader crown.
2. Remove in sequence, the screws (1),
the plate (2) and the seal (3).
3. Replace the nozzle using a 7 mm
spanner according to the gas to be
used.
4.
Loading ...
Loading ...
Loading ...