Loading ...
Loading ...
Loading ...
Operation(Continued)
t::
€:)
,m
o.1
StartingandOperation(Continued)
5. After the engine starts,turn off chokeandallow a brief
warm-up until the engine runs smooth beforebeginning
mower operation.
NOTE:Tostop the engine (and blade), releasethe blade
control.
Figure4. Starting the mower
Propelling the Mower
1. Start the engine. Referto the Section entitled"Starting
and Operation- Engineand Blade".
2. Move the ground speedcontrol (A, Figure 5) to the
desired speedposition.
3. Squeezethe wheel drive control (B) againstthe handle
to engagethe wheel drive and propelthe mower
forward. Forward speedcan be adjusted while the
mower is moving by changingthe position of the
ground speedcontrol.
Stopping
1. Stop forward motion of the mower by releasingthe
wheel drive control.
2. Stop the engine and blade by releasingthe blade
control.
HandleHeightAdjustment
Theheight of the mower handle can be adjusted asfollows:
1. Loosenthe lower nuts (A, Figure 6) on each
lower handle.
Figure 6:Adjusting the handleheight
2. Move the handleassembly (B) up or down until the
desired position is achieved.
3. Tighten the lower nuts on eachlower handleto maintain
the desired position.
WARNING
DONOTattempt anymaintenance, adjustmentsor service
with engine and bladerunning. STOPengine and blade.
Disconnectspark plug wire and secureaway from spark
plug. Engineand components areHOT.Avoid serious
burns, allow sufficient time for all components to cool.
Figure5. Mower drive controls
6 www.snapper.com
Loading ...
Loading ...
Loading ...