Loading ...
Loading ...
Loading ...
Operation(Continued)
WARNING
DONOTattempt any maintenance,adjustments or service
with engine and bladerunning. STOPengine and blade.
Disconnectspark plug wire and secure away from spark
plug. Engineand components areHOT.Avoid serious
burns, allow sufficient time for all components to cool.
InstallingtheGrassBagAdapter
(Continued)
• Flipthe pulley over sothat the bushing flange is
under the pulley. The bushing will act as a washer
betweenthe pulley and the standoff.
• Reassemblethe pulleyto the bag adapter,and
install the supplied replacementbolt, fitted with the
thread sleeve,into the recoil cover. Tightenall
hardwaresecurely.
Figure 12: Installing theadapterstandoff
Installingthe RecyclingPlug
1. Install the recycling plug (A, Figure 13) if recycling is
desired after the bag adapter is installed. Install the
recycling plug completely and securely into the bag
adapter(B).
IMPORTANT.Install thegrass bagas asafeguard.
Figure 13.Installing the recycfing plug
2. Refer to the section entitled "Recycling Operation".
m.
.-1
5. Route the recoil rope around the outside of the rope
guide pulley(C, Figure12).
Note:The recoil rope may needto be slackened. Referto the
section entitled "HandleAssembly".
WARNING
DONOToperatewithout entire Grass Catcheror guard in
place. GrassCatchercomponents are subject to
deterioration during normal use. Inspect frequently and
replaceworn or damagedcomponents immediately.
Loading ...
Loading ...
Loading ...