Loading ...
Loading ...
Loading ...
wolfappliance.com | 9
1 Rotate the leveling cams to level the front of the unit,
then push the locking tabs. Refer to the illustration
below.
2 Install and hand-tighten a screw from the bottom of
each slide to secure the unit to the slides.
3 Plug the power cord into the receptacle.
4 Place the cord into the clip at the top of the opening.
8
9
10
11
Installation
1 Center the bottom trim in the opening.
2 Align the front edge of the bottom trim with the front of
the opening. Refer to the illustration below.
3 Align the holes on the bottom of each slide with the
studs on the trim, then place the slides on the bottom
trim.
4 Verify the distance between the slides is 18⁄" (470).
Refer to the illustration below.
5 If necessary, use the shim material provided, then
secure the slides to the cabinet with 12 screws per slide.
6 Extend the slides to full extension.
7 Place the unit on the slides.
LOCKING
TAB
LEVELING
CAM
Level unit
18
1
/2"
(470)
Bottom trim alignment
Slide installation
Installation
Loading ...
Loading ...
Loading ...