Loading ...
Loading ...
Loading ...
installation instructions
4 INSTALLATION Induction Cooktops
TIPS & INFORMATION
tips & information
Before the installation, note down the serial number from the
rating plate. The rating plate of the appliance is on its lower
casing.
The Safety Instructions
WARNING
WARNING
You must read these!
• Make sure that the appliance has not been damaged in
transportation. Do not connect a damaged appliance.
If it is necessary, speak to the supplier.
• Only an authorized servicing technician can install,
connect or repair this appliance. Use only original spare
parts.
• Only use the built-in appliances after you assemble the
appliance into correct built-in units and work surfaces that
align to the standards.
• Do not change the specication of this appliance.
Due to a risk of injury and damage.
• Fully obey the laws, ordinances, directives and standards
in the country where you use the appliance (safety
regulations, recycling regulations, electrical safety rules
etc).
• Keep the minimum distances to other appliances and
units.
• Make sure that the ventilation space of 5mm, under the
benchtop and directly in front of the appliance is free.
The warranty does not cover damages caused by lack of
adequate ventilation.
• Install shock protection, for example install the drawers
only with a protective oor directly below the appliance.
• Do not use an external timer or a separate remote-control
system to operate the appliance.
• Set the cooking zone to “o” after each use. Do not rely
on the pan detector.
• Keep the cut surfaces of the worktop safe from moisture
with a correct sealant.
• Seal the appliance to the worktop with no space between
with a correct sealant.
• Keep the bottom of the appliance safe from steam and
moisture, e.g. from a dishwasher or oven.
• Do not install the appliance adjacent to doors and below
windows, due to risk of cookware being pushed o hot
appliance.
WARNING
WARNING
Risk of injury from electrical current. Carefully obey the
instructions for electrical connections.
• Make electrical mains terminal free of voltage.
• Install correctly to give shock protection.
• Loose and incorrect plug and socket connections can
make the terminal become too hot.
• A qualied electrician must install the connections in the
clamps correctly.
• Use a strain relief clamp on cable.
• Use the correct mains cable of type H05BB-F Tmax 90°C
(or higher) for a single phase or two phase connection.
• Replace the damaged mains cable with a special cable
(type H05BB-F Tmax 90°C; or higher). Speak to our
Customer Care team.
The appliance must have the electrical installation which lets
you disconnect the appliance from the mains at all poles with
a contact opening width of minimum 3mm. You must have
correct devices to isolate: line protecting cut-outs, fuses (screw
type fuses removed from the holder), earth leakage trips and
contactors.
~
Made in China
50/60Hz04609482
CHI644BB
220 - 240V
MODEL:
PNC:949163463
Induction 6.5kW
S NO.:
(240)949163463(21)04609482(20)00
M
M
L
L
:
:
0
0
0
0
5
5
0
0
2
2
2
2
~
Made in China
50Hz04609484
CHI944BB
220 - 240V
MODEL:
PNC:949163466
6.5 kW
S NO.:
(240)949163466(21)04609484(20)00
M
M
L
L
:
:
5
5
0
0
2
2
2
2
0
0
0
0
Loading ...
Loading ...
Loading ...