Loading ...
Loading ...
Loading ...
English - 31
OPERATING
( 2 )
( 1 )
1. Refer to page 12 for disassembly instructions.
2. Open the cap cover rail with a flat-blade
screwdriver.Using the doors
Ensure that the doors close all the way and are
securely sealed.
When the refrigerator door is only partially open, it
will automatically close. If the door is opened more
than its auto close range, it will remain open. You
must close it manually.
REMOVING THE FREEZER
ACCESSORIES
1. Freezer Room Guard
To remove - Remove the freezer room guard ( 1 )
by lifting the guard up.
To re-install - Push down until the guard ( 1 )
locks into place.
( 1 )
2. Super Extended Drawer
To remove - Pull the drawer out to full extension.
Tilt up the rear of the drawer and lift straight out.
To re-install - Place the drawer onto the rails ( 4 )
by tilting it up. Lower the drawer into place until it
is horizontal and slide the Drawer ( 3 ) in.
( 3 )
( 4 )
3. Freezer Drawer
To remove the freezer drawer - Pull the freezer
drawer out fully. Tilt up the rear of the bin and lift it
out to remove.
To re-install the freezer drawer - Place the bin
into the rail assembly.
CAUTION
You can scratch the side of the bin if you twist it left
or right when disassembling or re-assembling it.
CAUTION
Do not allow babies or children to go inside the
freezer drawer. They could damage the refrigerator
and seriously injure themselves. Do not sit on the
freezer door. The door may break. Do not allow
children to climb into the freezer drawer.
CAUTION
Do not remove the divider.
WARNING
If trapped inside, children may be injured or
suocate to death.
DA68-02952B-07.indb 31 2018. 7. 9. �� 4:54
Loading ...
Loading ...
Loading ...