Loading ...
Loading ...
Loading ...
36 37
Care and Maintenance
Product Care
Product Care
Care and Maintenance
• Remove the lower rack from the machine.
• Turn the coarse filter counterclockwise to the left and pull it out in
an upward direction A.
• Pull out the main filter B.
• Press on the two tabs of the coarse filter and remove the micro filter
C.
• Clean the filters thoroughly under running water. Use a brush if
necessary.
• Replace main filter.
• Replace the micro filter and the coarse filter into the main filter.
• Twist it clockwise until it clicks into place.
CAUTION
DO NOT operate your dishwasher without a filter. You will damage your
machine. Ensure that your filters are correctly installed.
Cleaning the Spray Arms
NOTICE
Dirt and/or calcium residue may block the nozzles on the spray arms. for
this reason, regularly check the spray nozzles.
1 Lower spray arm
2 Upper spray arm
• Remove the lower rack from the machine.
• Pull off the lower spray arm in an upward direction A.
• Loosen the fastening screw of the upper spray arm and pull off the
spray arm B by a downward motion.
• Clean the spray arms under running water.
• Replace the lower spray arm in a downward direction.
• Replace the upper spray arm and tighten the fastening screw by
turning it around to the left.
• Insert the lower rack.
CAUTION
Made sure the fastening screw is tight on the upper spray arm.
Check if the holes on the top of the
third spray arm are clogged. If they are
clogged, remove and clean them.
To remove them, slightly push them
upwards (1) and then turn clockwise (2).
To replace the impeller, seat it into its
slot, push slightly upwards and turn it
counter clockwise until it is securely fitted. When the impeller is
released, check if it rotates without any obstruction.
Loading ...
Loading ...
Loading ...