Loading ...
Loading ...
Loading ...
OBSERVEALL LOCALCODESAND ORDINANCES.
DONOT,UNDERANY CIRCUMSTANCES,REMOVE
THE POWERSUPPLYCORDGROUNDPRONG.
ELECTRICALGROUNDISREQUIREDONTHIS
APPLIANCE.
For230/208volt60 Hz,AC only, 15Afusedand
properlygroundedelectricalsupply isrequired.A time
delayfuse or time delaycircuitbreakeris
recommended.Usea dedicatedcircuit,servingonly
thisappliance.
DONOT USEAN EXTENSIONCORD.
RECOMMENDEDGROUNDINGMETHOD
Foryourpersonalsafety,thisappliancemustbegrounded.
Thisappliancehasa powersupplycordwitha 3-prong
groundingplug.Tominimizepossibleshockhazard,the
cordmustbepluggedintoa matinggroundingtypewall
receptacleandgroundedinaccordancewiththeNational
ElectricalCode(ANSI/NFPA70)latesteditionandalllocal
codesandordinances.Ifamatingwallreceptacleisnot
available,it isthepersonalresponsibilityandobligationof
thecustomerto havea properlygrounded3-prongwall
receptacleinstalledbyaqualifiedelectrician.
115V~ 230V ~
Powercord may include acurrent interrupter
device.A test and reset button is provided on the
plug case. The device should be tested on a
periodic basisby first pressing the TEST button
and thenthe RESET button. Ifthe TEST button
does not trip or if the RESET button will not stay
engaged, discontinue use of the air conditioner and
contact a qualified service technician.
NOTE: The shape may be different according to its model.
Use Wall Receptacle Power Supply
Standard 125V,
3-wire grounding
receptacle rated
15A, 125V AC
(_ Standard 250V,
3-wire grounding
receptacle rated
15A,250V AC
(_ Standard 250V,
3-wire grounding
receptacle rated
20A, 250V AC
Use 15 AMP. time
delay fuse or 15 AMP.
circuit breaker.
Use 20 AMP. time
delay fuse or 20 AMP.
circuit breaker.
Electrical Shock Hazard
Plug into agrounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in
death, fire, or electrical shock.
You can choose between two methods below according to your window sill shape and preference.
USING SLIT "A"
Fasten the stopper using 2 screw holes, and lead
out the power cord through slit "A".
-4-
USING SLIT "B"
Fasten the stopper using left screw hole, and rotate
properly to lead the power cord out through slit "B".
IE_I.... ;_;;_ i_:_:_ _:_'_"_%'_'_'_'%;
Loading ...
Loading ...
Loading ...