Loading ...
Loading ...
Loading ...
5. A small amount of smoke may be produced during first
time use or when the appliance has not been used for a
long period of time, this is normal and will quickly
disappear.
6. When the room reaches the desired temperature, the
heater will temporarily go off.
7. If the room temperature falls below the desired
temperature, the heating elements will turn on again until
the room temperature reaches the desired temperature
Frost protection:
The frost protection is a setting that operates when the
ambient temperature of the room that the heater has been
placed in falls below 5⁰C (approximately). The heater
automatically turns on to keep the room temperature at 5⁰C
or higher. This means the heater may cycle on and off as and
when the temperature of the room is below or over 5⁰C
(approximately). Note, the unit has to be powered on, the
power dial set to low, medium or high heat setting and the
temperature control should be set to the ‘0’ position.
The appliance is fitted with an over heat protection system.
• Overheat protection - the power to the heating elements
will automatically cut off if the temperature of the heating
elements exceeds a certain limit. In the event of
overheating, the heater will stop operating. Once the
appliance has completely cooled the appliance will then
resume operating as normal.
USING YOUR CONVECTION HEATER
10
Loading ...
Loading ...
Loading ...