Loading ...
Loading ...
Loading ...
There is interior moisture The room is humid A humid environment contributes to moisture buildup.
buildup .....................................................................................................................................................................................................................................................................................................................................................................................
NOTE: Some moisture The door(s) are opened often or not Allows humid air to enter the refrigerator. Minimize door
closed completely, openings and close doors completely.
buildup is normal
The door is blocked open Move food packages away from door.
A bin or shelf is in the way Push bin or shelf back into the correct position.
Storing liquid in open containers This adds humidity to the refrigerator interior. Keep all
containers tightly covered.
There is frost/ice buildup in The drawer is opened often or left Minimize drawer openings and close drawer completely after
the freezer compartment open. use.
Poor door seal Ensure door seals are making full contact with the
refrigerator cabinet to allow for an adequate seal.
Temperature controls are not set See "Using the Control(s)" for recommended temperature
correctly settings.
Ice and Water
The ice maker is not The refrigerator is not connected to a Connect refrigerator to water supply and turn water shutoff
producing ice or is not water supply or the water supply shutoff valve fully open.
producing enough ice valve is not turned on.
There is a kink in the water source line. A kink in the line can reduce water flow. Straighten the water
source line.
The ice maker is not turned on. Make sure the ice maker is on. See "Ice Maker and
Ice Storage Bin."
The refrigerator has just been installed. Wait 24 hours after ice maker installation for ice production to
begin. Wait 3 days for full ice production.
The refrigerator door is not closed Close the door firmly. If it does not close completely, see "The
completely, doors will not close completely."
A large amount of ice was recently Allow sufficient time for ice maker to produce more ice. See
removed. "Ice Maker and Ice Storage Bin" for ice production rates.
An ice cube is jammed in the ice maker Remove ice from the ejector arm with a plastic utensil.
ejector arm.
A water filter is installed on the Remove the water filter and operate the ice maker. If ice
refrigerator, volume improves, then the filter may be clogged or incorrectly
installed. Replace filter or reinstall it correctly.
A reverse osmosis water filtration system This can decrease water pressure. See "Water Supply
is connected to your cold water supply. Requirements."
The ice cubes are The water shutoff valve is not fully open. Turn the water shutoff valve fully open.
hollow or small
NOTE: This is an There is a kink in the water source line. A kink in the line can reduce water flow. Straighten the water
indication of low water source line.
pressure. A water filter is installed on the Remove filter and operate ice maker. If ice quality improves,
refrigerator, then the filter may be clogged or incorrectly installed. Replace
filter or reinstall it correctly.
A reverse osmosis water filtration system This can decrease water pressure. See "Water Supply
is connected to your cold water supply. Requirements."
Questions remain regarding water Call a licensed, qualified plumber.
pressure.
34
Loading ...
Loading ...
Loading ...