Tower T22014RGB SAFETY AND INSTRUCTION MANUAL

Loading ...

1. Remove your appliance from the packaging and carefully check the contents

against the parts list.

2. Check that there is no damage to the cord or any visible damage to the body.

3. Dispose of the packaging in a responsible manner.

4. Remove any stickers or labels from the appliance

5. Stand the steamer upright and straighten the cord.

6. Before ﬁrst use, turn the steamer on for a few minutes. This will help remove

any impurities and odours resulting from the manufacturing process. Once

the steamer has been puriﬁed, test it on an old piece of fabric to ensure the

plate and water tank are clean of any residue.

7. To avoid a circuit overload, do not use the steamer with an extension socket.

Filling the tank with water:

CAUTION! Before ﬁlling the tank with water make sure the appliance is unplugged.

1. To use the unit, start by ﬁlling up the water tank located at the bottom.

2. To ﬁll up the water tank, ﬁrst press the tank release button on the side of the

unit to detach it from the main body of the steamer.

3. Once the water tank has been detached from the steamer, remove the

pressure cap from the ﬁlling hole at the back of the water tank. To do this,

insert a ﬁnger or ﬁngernail into the small space at the top of the water

tank cover and pull it ﬁrmly away from the main body of the unit. Once the

water tank cover has been removed, ﬁll the tank with fresh water. To ensure

optimum performance, be careful not to ﬁll the tank above the Max ﬁll line.

Note: It is not necessary to undo the screws at the back of the water tank to ﬁll it.

DO NOT loosen any screws or attempt to disassemble the water tank.

4. When the tank has been ﬁlled with water, replace the pressure cap and slot

the tank back into the main body of the unit until it clicks into place.

5. The steamer is now ready for normal use.

Note: When the water tank is empty or there is a build-up of limescale inside, the

unit’s operation will become noisier than usual and steam will stop emitting from

the steam nozzle. When this occurs, re-ﬁll the water tank or de-scale the unit as

detailed in the ‘Cleaning and Care’ section of this instruction manual.

To start using the garment steamer:

1. Fill the tank with water, as detailed above.

2. Once the tank has been ﬁlled and replaced into the main body of the steamer,

plug the unit into an active mains socket. The red light-up indicator at the top

of the steamer will begin to ﬂash to indicate the unit is powered up and the

heat-up process has begun.

3. When the water inside the unit reaches the correct temperature, the red light-

up indicator will go out. The steamer is now ready for use.

4. When the steamer is ready, press the trigger at the front of the unit to begin

releasing steam. The motor unit will vibrate slightly and steam will start

emitting from the front nozzle.

4 - Before First Use

5 - Using Your Appliance

Loading ...

Tower T22014RGB Steam