Loading ...
Loading ...
Loading ...
8
Propane (LP) Gas Connection
Appliance Pressure (LP Gas) 10” W.C.
Inlet Pressure (LP Gas) 11” - 14” W.C.
Assemble pipe/hose assembly as shown:
After assembly, turn tank valve on and turn control
valves on your grill to the HI position for 10 to 15
seconds to purge the line of air.
Inspect the supply hose before each use. If there
is evidence of excessive abrasion, wear or cuts to
the hose it must be replaced prior to operation of
your grill. Replacement hose assembly shall be
that specified by the manufacturer.
To connect, insert the regulator inlet into the tank
valve and turn black coupler clockwise until the
coupler tightens. DO NOT over tighten the coupler.
To disconnect, turn the tank valve off then turn the
black coupler counter clockwise until disengaged.
When your grill is not in use, the gas must be
turned off at the supply tank. The tank must be
stored outdoors, out of the reach of children and
away from any enclosed areas.
Installation
Loading ...
Loading ...
Loading ...