Loading ...
Loading ...
Loading ...
STEP 17: (SEE FIGURE17)
* Attach the rope (12) to the center of the upper rear
hopper tube.
FIGURE 17
STEP 18 (SEEFIGURE 18)
* Attach the hopper bag to the sweeper by sliding
the pivot bolts in the hopper tubes into the pivot rod
retainers in the ends of the bag arm channels.
ATTACHING SWEEPER HITCH TO TRACTOR
1. Place the tractor and sweeper on a flat level surface.
2. Set the sweeper height adjustment to about the
middle of the adjustment range.
3. Attach the sweeper hitch to the tractor hitch,
arranging the hitch brackets according to the drawbar
height of your tractor as shown in figure 20 below and
in figure 6 on page 6.
4. Arrange the spacers into one of the three possible
combinations as shown below in figure 20.
iMPORTANT: To obtain the best performance from your
sweeper, arrange the spacers so that the sweeper bag is
approximately level with the ground as shown in figure 19.
BRUSH HEIGHT ADJUSTED
APPROXIMATELY MID-WAY
APPROXIMATELY LEVEL
(6" to 8" FROM SURFACE)
FIGURE 19
GROUP "A" VEHICLES
WiTH HITCHES
HAVING 11"TO 13"
GROUND CLEARANCE.
GROUP "B" VEHICLES
WITH HITCHES
HAVING 9" TO 11"
GROUND CLEARANCE.
GROUP "C" VEHICLES
WiTH HITCHES
HAVING 7" TO 9"
GROUND CLEARANCE.
\',\
ky
iiiiiiiiiiii ...........
FIGURE 18 FIGURE 20
Loading ...
Loading ...
Loading ...