Loading ...
Loading ...
Loading ...
LIGHTING THE MAIN BURNERS USING ELECTRONIC IGNITION
1. Open the lid.
2. Ensure all burner control knobs are in the °'()ft _' position.
3. Turn on the LP gas by slowly turning the hand wheel on the cylinder valve.
4. Turn one main burner control knob to "HI/LIGHT".
5. Depress the electronic ignition button and hold down. You should hear a clicking sound, which shows the
electronic ignition is working.
6. If the burner does not light within 5 seconds, turn the burner control knob to "Oft _'. Wait 5 minutes tbr the
gas to clear, and repeat the above procedure. Use the Manual directions if it still will not light.
7. When lit, turn the control knob to the desired setting.
8. Your grill is equipped with continuous ignition. Simply turn any other of the main burner control knobs
next to the lit burner to "HI/LIGHT" to light, and then to the desired heat setting. They will ignite
automatically once the initial burner is lit. Do not press the electronic ignition button again.
MANUALLY LIGHTING THE MAIN BURNERS WITH THE MATCH HOLDER
1. Open the lid.
2. Ensure all burners are in the "Oft" position.
3. Slowly mrn on the gas at the LP cylinder valve if it is not already on.
4. Place a match in the Match Holder. This is located on the left
side of the grill cabinet underneath the side burner shel_:
5. Strike the match, and insert into the lighting hole close to the burner.
6. Turn the left burner control knob to "HI/LIGHT".
7. If the burner does not light within 5 seconds, turn the burner control
knob to _1 . Wait 5 minutes tbr gas to clear, and try again.
8. When lit, turn the control knob to the desired heat setting.
LIGHTING THE SIDE BURNER WITH ELECTRONIC IGNITION
1. Open the side burner cover
2. Ensure the side burner control knob is in the "()ft_' position, as well as any main burners not in use.
3. Slowly turn on the gas at the LP cylinder valve if it is not already on.
4. Turn the side burner control knob to "HI/LIGHT".
5. Depress the electronic ignition button and hold. You should hear a clicking sound, which shows the
electronic ignition is working.
6. If the burner does not light within 5 seconds, turn the burner control knob to °'Of_". Wait 5 minutes _br the
gas to clear, and repeat the above procedure. Use the Manual directions if it still will not light.
7. When lit, turn the side burner control knob to its desired heat setting.
LIGHTING THE SIDE BURNER WITH THE MATCH HOLDER
1. Open the side burner cover.
2. Ensure the side burner control knob is in the °'Oft _' position, as well
as any main burner not in use.
3. Slowly turn on the gas at the LP cylinder valve if it is not already on.
4. Strike the match, and place near the top of the burner.
5. Turn the side burner control knob to "HI/LIGHT".
6. If the burner does not light within 5 seconds, turn the burner
control knob to °'()ft_'. Wait 5 minutes for the gas to clear,
and try again.
7. When lit, turn the side burner control knob to its desired heat setting.
22
Loading ...
Loading ...
Loading ...