Loading ...
Loading ...
Loading ...
Control Pad Functions
CANCEL PAD-- Used to
cancel any function
previously entered
except the time of day
and minute timer. Push
CANCEL to stop
cooking.
BAKE PAD--Used to
enter the normal
baking mode
temperature.
READ THE INSTRUCTIONS CAREFULLY BEFORE USING THE OVEN. For
satisfactory use ofyour oven, become familiar with the variousfunotionsof the
oven as described below.
UP and DOWN ARROW PADS-- Used along with the
function pads to select oven temperature, cooking
time, stop time (when programming an automatic
stop time), time of day, clean time
CLOCK PAD_ Used
e of
day.
LIGHTS-- These
light to show which
feature isin use.
BROIL PAD_
Used
the variable
broil function.
CLEAN PAD--
Used to selectthe
self-cleaning
cycle.
OVEN, PREHEAT & LOCK LIGHTS-- The "OVEN"
light will glow each time the oven unit turns on to
maintain the set oven temperature. The "PREHEAT"
light will glow when the oven isfirst set to operate,
or if the desired temperature is reset higher than
the actual oven temperature. The "LOCK" light will
flash until the door locks when the self-clean cycle
is in use. It glows constantly after the door locks.
TIMER PAD--
Used to set or
cancel the minute
timer. The minute
timer does not
start or stop
cooking.
E PAD--
Used to enter the
length of the
baking time.
PAD--
Used to set the
desired stop time
for baking. Can be
used with BAKE
TIME to program a
delayed bake cycle.
The oven can be programmed to:
• Bake normally
• Time bake
• Broil
• Self-clean
For a silent control panel:
When choosing a function, a beep will be heard each time a pad is pushed. If desired, the controls can be programmed
operation. Push and hold _,_. After 7 seconds, the control will beep once. This will block the controls from
for silent
sounding
when
a
pad
is
pushed.
sound, push and hold _ again for 7 seconds until 1 beep is heard.
To return the
Note: The control will return to the audible mode after a power outage.
Temperature conversion:
The electronic oven control isset to operate in °F (Fahrenheit) when shipped from the factory. The oven can be programmed
for any temperature from 170°F to 550°F (65°C to 287°C).
To change the temperature to °C (Celsius) or from °C to °F (control should not be in a Bake or Clean mode):
1. Push _. " " appears in the display.
2. Push and hold the _ until "HI" appears in the display.
3. Push and hold _ until °F or °C appears in the display.
4. Push the _ or _ to change °F to °C or °C to °F.
5. Push any function pad to return to normal operating mode.
Loading ...
Loading ...
Loading ...