Loading ...
Loading ...
Loading ...
8
Audio Troubleshooting Guide
Frequently asked questions about Kanto’s sub8.
• Ensure the power cable is connected to the
subwoofer and power outlet.
• Ensure that the power outlet is providing power.
• Verify that the power switch on the rear of the
subwoofer is in the “On” position.
• Check the fuse on the rear panel of the subwoofer to
ensure it’s intact.
• Check that the RCA cable connected to and from the
subwoofer is rmly seated. Try a dierent cable or
source to isolate the issue.
• Make sure the subwoofer is connected to a power
outlet and is set to “On” or “Auto”.
• Increase the volume of the subwoofer.
• Ensure audio source is playing audio.
• Check that the audio cable connected to the source
is rmly connected. Test another audio cable if
available.
• Verify that the volume of the subwoofer is not at it’s
minimum level.
• Ensure you are using an RCA to RCA subwoofer
cable.
• Verify if the noise is coming from the source by
removing the source from the subwoofer.
• Make sure it is not a power issue by trying a power
outlet that is on a dierent circuit.
• Check that the audio cable connected to and from
the source is rmly seated. Try a dierent cable or
source to isolate the issue.
• Set the source of the volume to a higher level and
reduce the volume of the subwoofer. Low source
volume can negatively aect dynamic range.
• Test a dierent song or source to isolate the issue.
• Adjust crossover to match the rest of the system.
2.
6.
1.
5.
4.
3.
The green light on the rear of the sub-
woofer is illuminated but there’s no audio
playing.
You are experiencing buzzing, hissing or
distortion.
None of the lights on the rear of the
subwoofer are illuminated.
There’s no audio coming from an attached
subwoofer.
You are experiencing poor audio quality.
Subwoofer is going into standby while
listening to audio.
• Set the volume of the source to its highest level. Low
source volume can inadvertently trigger standby
mode.
Loading ...
Loading ...
Loading ...