Loading ...
Loading ...
Loading ...
36
EN
• Before descaling the appliance, remove the mains plug from the wall socket
and wait until the appliance has cooled down
• Do not immerse the appliance in water or any other liquids.
• Make sure that the grinding function is not activated when descaling the
appliance.
To start the descaling process:
1. Open the cover (24).
2. If necessary, empty the water reservoir (14).
3. Remove the carbon lter holder (20) from the water reservoir (14).
4. Fill the water reservoir (14) with a suitable descaling agent.
5. Place the coee pot (16) on the storage plate (18).
6. Insert the mains plug into the wall socket.
7. Switch on the appliance by pressing the on/o button (1).
8. Let the appliance run until
1
⁄3 of the descaling agent is in the coee pot (16).
9. Switch o the appliance by pressing the on/o button (1).
10. Let the descaling agent work for approximately 30 minutes.
11. Switch on the appliance by pressing the on/o button (1).
12. Let the appliance run until the remaining descaling agent is in the coee pot
(16). The appliance stops automatically when the water reservoir (14) is empty.
Rinse the appliance twice according to the below procedure:
1. Fill the water reservoir (14) with clean water up to the maximum mark on the
water level indicator (15).
2. Place the empty coee pot (16) on the storage plate (18).
3. Switch on the appliance by pressing the on/o button (1).
4. Let all water run through the appliance. The appliance stops automatically
when the water reservoir (14) is empty.
After descaling:
1. Place the carbon lter holder (20) in the water reservoir (14).
2. Close the cover (24).
3. Switch o the appliance by pressing the on/o button (1).
4. Keep the coee quantity selector (3) and the coee strength selector (4)
pressed until the indicator (D) disappears from the display (8) (g. C).
5. Clean the outside of the appliance with a damp cloth. Dry the outside of the
appliance with a clean, dry cloth.
6. The appliance is ready for use.
Loading ...
Loading ...
Loading ...