Loading ...
Warranty ...................................................................... 2
Safety Instructions ...................................................... 2
Know Your Nailer ......................................................... 3
Operation ................................................................. 4-6
Maintenance ............................................................ 6-7
Troubleshooting ........................................................... 7
Espa_ol .................................................................. 8-13
Parts and Illustrations List ......................................... 14
CRAFTSMAN ONE YEAR FULL WARRANTY
FOR ONE YEAR from the date of purchase, this
product is warranteed against any defects in material
or workmanship. A defective product will be replaced
free of charge.
For warranty coverage details to obtain free re-
placement, visit the web site: www.craftsman.com
This ONE YEAR warranty is void if this product is
ever used while providing commercial services or if
rented to another person. For 90 DAY commercial
use terms, see listing on Craftsman warranty web
page. This warranty gives you specific legal rights,
and you may also have other rights which vary from
state to state.
Sears Brands Management Corp. Hoffman Es-
tates, IL 60179
• Read and follow all safety rules and operating
instructions in this manual and on warning label of
tool before using this tool. Failure to follow warnings
could result in DEATH or SERIOUS INJURY. Keep
this manual with the tool.
• Keep work area clean and properly lighted.
• Keep children, bystanders and visitors at a safe
distance from work area while operating this tool.
• Air tool operators and all others in work area MUST
always wear safety goggles complying with the
United States ANSI Z87.1 to prevent eye injury from
fasteners and flying debris when loading, operating
and unloading this tool. Everyday eyeglasses have
only impact resistant lenses. These are NOT safety
glasses. ANSI Z87.1 safety glasses have perma-
nently attached rigid, hard plastic side shields and
will have "Z87.1" printed or stamped on them.
• Always wear ear protection. The work area may
include exposure to excessive noise levels which
will require necessary ear protection. Some envi-
ronments will require head protection: use head
protection conforming to ANSI Z89.1.
Do not alter or modify this tool in any way. Do not
use this tool for any application other than for which
it was designed.
Do not use oxygen, carbon dioxide, high-pressure
compressed gas or bottled gases as the power
source for this tool. The tool will explode and seri-
ous personal injury could result.
Never connect the tool to air pressure which could
potentially exceed 200 PSI. Use only clean, dry
regulated air within rated range as marked on tool.
The tool must have a male, free-flow hose coupling
so that all air pressure is removed from the tool
when the coupling joint is disconnected. Failure to
use proper coupling could cause accidental dis-
charge, possibly causing injury.
• Only use air hose that is rated for maximum work-
ing pressure of 150 PSI or 150% of the maximum
system pressure, whichever is greater.
• Do not pull trigger or depress contact trip while
connecting to the air supply, as the tool may cycle,
possibly causing injury.
• When loading the tool, do not pull trigger or de-
press contact trip. Do not point the tool at yourself
or others. Do not place hand or any part of body in
the fastener discharge area of the tool as accidental
actuation may occur and cause injury.
• Disconnect tool from air supply before loading or
unloading, performing tool maintenance, clearing
a jammed fastener, leaving work area, moving tool
to another location or handing the tool to another
person.
• Use only the size and type of fasteners designated
in the Specifications list in this manual.
• Do not load the tool until you are ready to use it.
• Always assume that the tool contains fasteners.
Keep the tool pointed away from yourself and others
at all times. Never engage in horseplay. Never pull
the trigger unless the contact trip is in contact with
the workpiece. Keep others at a safe distance from
the tool while the tool is in operation.
• Always remove finger from trigger when not driving
fasteners to avoid accidental firing. Never carry the
tool with finger on or under the trigger as accidental
actuation may occur and cause injury.
• Always keep hands and body away from the fas-
tener discharge area when air supply is connect-
ed to the tool. Grip tool firmly to maintain control
while allowing tool to recoil away from work surface
as fastener is driven. If contact trip is allowed to
recontact work surface before trigger is released, an
unwanted fastener may be driven.
• Check operation of the contact trip frequently. Nev-
er use the tool if the contact trip, trigger or springs
have become inoperable, missing or damaged. Do
not alter or remove contact trip, trigger or springs.
Never use a tool that is leaking air, has missing or
damaged parts, or requires repair.
• Never drive fasteners on top of other fasteners or
with the tool at too steep an angle. The fasteners
can ricochet and cause injury. Do not drive fasten-
ers close to the edge of the work piece. The work-
piece is likely to split, allowing the fastener to fly free
and cause injury. Do not attempt to drive fasteners
into hard or brittle materials such as concrete, steel
or tile.
• Do not overreach. Always place yourself in a firmly
balanced position when using or handling the tool.
Do not attach the hose or tool to your body.
• Do not operate tool without fasteners or damage to
tool may result.
• Do not use tool without safety warning label. If
label is missing, damaged or unreadable, contact
1-800-469-4663 to obtain a new label.
• Only qualified repair personnel must perform tool
service.
• When servicing a tool, use only identical repair
parts.
• Store tool out of reach of children and other un-
trained persons.
WARNING: Some dust created by using power tools
contains chemicals known to the State of California to
cause cancer and birth defects or other reproductive
harm.
2
Loading ...
Loading ...
Loading ...