Loading ...
Loading ...
Loading ...
Washing Procedures, continued
If desired, add liquid fabric softener to fabric
softener dispenser (available on some models).
For models with built=in dispenser:
Add liquid softener to the dispenser, following fab-
ric softener label directions. DO NOT use granular
detergent in this dispenser.
DO NOT fill above the maximum fill line.
Turn fabric softener option on.
• Do not use bleach in this dispenser.
For models without a built-in fabric softener
dispenser:
• Follow fabric softener label directions.
• Add diluted fabric softener to the final rinse. You
may use a fabric softener dispensing ball.
Other Wash Products
Water conditioner, detergent booster and enzyme
products may be added with the detergent.
8 Select the appropriate cycle and settings for
the load.
To prevent staining, do not overfill the "FABRIC
SOFTENER"chamber or pour liquid fabric softener
directly on the wash load.
See Washer Operating Instructions on following
pages.
Use of multi-product (detergent plus softener) sheets
or color-absorbing sheets NOT recommended. They
could disable your machine and result in unwarranted
Start the washer.
• Close the washer tid. The washer will not operate
with the tid open.
• Push in or turn the cycle selector knob or turn any
option knob to "wake" the washer. You wilt hear
three short beeps to indicate washer is ready to
operate.
• After making your selections, push in the selector
knob to start the cycle. You will one hear short
beep and the washer lid will lock.
• The washer wilt perform a dry toad sensing proce-
dure before adding water to the tub.
• To pause a running cycle, push in the cycle selec-
tor knob.
• Toadd a forgotten item to the wash tub, push
in the cycle selector knob to pause the cycle as
above. You will hear two beeps. After the lock
releases, lift the lid and add the item. Close the lid
and push in the selector knob again, continuing the
current cycle.
If a running cycle is paused, washing performance may
differ.
Tocancel a running cycle, push in and hold the cycle
selector untit the washer discontinues running, You
may have to perform a drain cycle to remove water
left in the tub.
10 Remove items when the cycle is completed.
For your safety, the lid is locked during the opera-
tion of the washer. It witl unlock at the cycle end
after the tub has come to a complete stop.
SAFETY LID LOCK
• To open the lid during cycle operation, push in the
cycle selector knob to pause the cycle. You will
hear two beeps. Wait for the lid lock to release. Do
not force open the locked lid.
To avoid serious personal injury, do not operate washer
if safety lid tock is missing, damaged or operating
improperly.
Place washed items in automatic dryer, line dry,
or dry fiat as directed by fabric care label. Excess
wrinkling, color transfer or odors may develop in
items left in the washer after the cycle has ended.
I_ For best results
Follow the fabric care label
instructions on items to
be dried.
Loading ...
Loading ...
Loading ...