Loading ...
Loading ...
Loading ...
This manual covers many models and not all cycles, options, or features listed are available on every model. Consoles shown above
for reference onl_ Your model may diffe_
Drying Cycle Selection
Turn the cycle selector in either direction to the cycle
desired.
For best results
Follow the fabric
label instructions on
items to be dried.
To change the cycle after it has begun, push in or turn
the cycle selector knob to pause the current running
cycle. Make the new selection and push in the cycle
selector knob again to start the new cycle.
Auto Dry Cycles
Auto Dry cycles take the guesswork out of selecting
the correct drying time for each load. Moisture sensing
bars in the front of the dryer drum (on certain models)
sense the moisture level of the toad as it tumbles
through the heated air. With Auto Dry cycles, the toad
will automatically be dried at the selected temperature
to a specific dryness level. Auto Dry cycles save time and
energy and protect fabrics.
When the load has reached the dryness level, it will
continue to tumble during a cool down period. This helps
reduce wrinkling and makes items easier to handle during
unloading.
Drying time varies depending on size and dampness of
load and fabric type. If the load is too small or almost
dry, the moisture sensing bars may not detect enough
moisture to continue the cycle and the cycle may end
after a few minutes. If this occurs, select a Timed Dry
cycle.
Room temperature and humidity, type of installation and
electrical voltage or gas pressure can also affect drying
time.
normal
Select this cycle to dry everyday fabrics including
cottons, linens and sheets.
heavy duty
Select this Auto Dry cycle to dry durable fabrics such as
work wear and overalls.
deiicates
Select this cycleto dry knits and delicates.
casual
Select this cycle to dry cottons, blends and permanent
press items with a no-iron finish.
cotton towels (on select models)
Select this cycleto dry heavy loads such as towels and
non-rubber-backed bath mats.
Loading ...
Loading ...
Loading ...