Loading ...
Loading ...
Loading ...
11
1 Remove screws A, B and C from the
plate on the base of the range.
2 Replace screw C with one of the
screws supplied with the feet covers.
zz
This screw must be replaced before
attaching the mounting bracket to the
base of the range.
3 Attach the mounting bracket to
the base of the range using the
suppliedscrews.
zz
Ensure the two supplied washers are
fitted between the rear edge of the
bracket and the base of the range
(as shown).
4 Secure covers to brackets using the
provided screws.
FITTING THE ADJUSTABLE FEET
Fitting the adjustable (rear) feet covers (optional)
If installing rear feet covers use the following instructions to attach the mounting brackets to the base of the range.
Washers
MOVING THE RANGE
IMPORTANT!
zz
When raising the range to upright position always ensure
two people carry out this manoeuvre to prevent damage
to the adjustable feet.
zz
BE CAREFUL: do not lift the range by the oven door
handle, the hob rail or the cooktop trim as this may
damage theappliance.
zz
When moving range to its final position DO NOT DRAG.
Lift feet clear of floor.
C
A
B
C
Loading ...
Loading ...
Loading ...