Loading ...
Loading ...
Loading ...
6
The appliance should always be plugged into its own individual electrical outlet which has a voltage
rating that matches the rating label on the appliance. This provides the best performance and also
prevents overloading house wiring circuits that could cause a fire hazard from overheating. Never
unplug the appliance by pulling on the power cord. Always grip the plug firmly and pull straight out
from the receptacle. Repair or replace immediately all power cords that have become frayed or
otherwise damaged. Do not use a cord that shows cracks or abrasion damage along its length or at
either end. When moving the appliance, be careful not to damage the power cord.
Extension Cord
Because of potential safety hazards under certain conditions, it is strongly recommended that you do
not use an extension cord with this appliance. However, if you must use an extension cord, it is
absolutely necessary that it be a UL/CUL-Listed, 3-wire grounding type appliance extension cord
having a grounding type plug and outlet and that the electrical rating of the cord be 115 volts and at
least 10 amperes.
Anti-tip Bracket Installation
When properly installed, the anti-tip brackets will keep your appliance from tipping forward, even
when an unexpected weight is placed on the front of the unit. Follow these instructions to ensure
proper installation.
The brackets must be firmly screwed into the floor or wall behind the unit, depending on the height of
the unit off the floor. The anchoring screws should be appropriate to the type of surface your until will
be anchored to.
• Mark the locations of the screw holes of the anti-tip brackets so that the brackets align with the
rear grillwork cutouts.
• Use an appropriate masonry drill bit, depending on what type of surface your unit will be
anchored to. Drill into a suitable foundation, either wood studs or joists.
NOTE: The brackets must not be screwed into sheetrock.
• Secure brackets to the floor or wall, using screws.
• Once the brackets are secured, slide the appliance into place, being sure that the horizontal
prongs of the bracket are positioned in the grillwork at the back of the unit. Test the bracket by
exerting a downward force on the front of the unit; if it seems stable, the unit is secure.
NOTE: If the unit is relocated, the brackets must be removed and installed in the new location
Loading ...
Loading ...
Loading ...