GE - General Electric CV48SSLSS Café 48" Professional Hood

User Manual - Page 6

For CV48SSLSS.

PDF File Manual, 48 pages, Download pdf file

Loading ...
Loading ...
Loading ...
6 49-80819
Some models have reusable metal grease baffles and
drip trays.
The metal baffles channel grease released by foods
on the cooktop into the drip trays. The baffles also help
prevent flaming foods on the cooktop from damaging the
inside of the hood.
For this reason, the baffles must ALWAYS be in place
when the hood is used. The grease baffles and drip trays
should be cleaned once a month, or as needed.
To clean the grease baffles and drip trays, drain and
wipe all excess grease with a dry paper towel. Soak
them and then swish them around in hot water and
detergent. Don’t use ammonia or ammonia products
because they will darken the metal. Do not use abrasives
or oven cleaners. Rinse, shake and let them dry before
replacing. They may also be cleaned in an automatic
dishwasher.
To remove:
Grasp the baffle knobs and pull them up, forward and
out. Grasp the drip tray and carefully lift it up and out of
the hood track.
To replace the drip trays:
1. Place and seat the drip tray into the hood track.
2. Slide them left or right until all trays are side-by-side
in place in the track.
To replace the baffles:
1. Hold the baffle at the bottom by one of the knobs .
2. Place the other end of the baffle against the inside
front of the hood.
3. Slide it up and push the bottom end back until it firmly
seats into place.
To clean behind the knobs:
If the knobs are difficult to remove, place a non-abrasive
cloth between the knob gap and hood body to assist with
pulling the knobs off for cleaning.
Baffle Grease Filters and Drip Trays (on some models)
CARE AND CLEANING: Baffle Grease Filters and Drip Trays
Drip Tray Replacement
Drip Tray
Drip Tray
Track
Baffle
Baffle Replacement
Loading ...
Loading ...
Loading ...