Loading ...
Loading ...
Loading ...
REVERSE HARDWARE ON CABINET
~
TRANSFER BOTTOM
HIHGEBWKETTOTHE
LEFT.
a. Remove the base grille. Grasp it at the bottom and
pull it straight out.
PLASTIC
/
WASHER
RIGHT
b. Using a
Torxdriver,
remove the hinge (and shim
glued to it) and plastic washer from the bottom right
side of the cabinet.
PLASTIC
It-----’
c. Reinstall the hinge (and shim glued to it) and
plastic washer to the bottom left side of the cabinet.
❑
TRAHSFERCEHTERHIHGE
BRMKET
TO THE LEFT.
DO NOT REMOVE
THIS SCREW
I
a. Remove the hinge bracket (and shim glued to it)
from the center right side of the cabinet by removing
the three outermost Torx screws.
b. Remove the three outermost Torx screws from the
center left side of the cabinet and screw them into
the holes at the right side uncovered in Step (a) above.
Place the center hinge bracket over the holes at the
center left side of the cabinet, insert the screws you
removed from the opposite side, and tighten them.
❑
TRANSFER TOP HINGE TO THE LEFT.
Interchange hinge and screws at top right with
screws at top left of cabinet. Do not tighten screws
on hinge side at this time.
I
❑
TRANSFER DOOR STOPS.
a. On each door, move
the metal door
stop
from
yT
—
the right end to
th;
left end.
<
b.
Move any screws from the left end to the right end.
20
Loading ...
Loading ...
Loading ...